1 / 3
Reusable Food Storage / Freezer Bag Holder / Organizer — image 1
1 / 3

Reusable Food Storage / Freezer Bag Holder / Organizer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wall-mountable holder for reusable food/freezer bags.

Rating
0 / 5
Likes
25
Downloads
42
Makes
0
Views
488
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

This design mounts to a wall/cupboard door to hold reusable food/freezer/fridge bags. The dimensions were based off of these bags but others may work too. The 4 bags of each size fit comfortably.

The front divider is 89mm high and the rear two dividers are 160mm high. The holders can be mounted at any width apart to accommodate different size bags.

The holders can be secured with double sided 3M VHB or similar, or you can use small screws through the included holes. I used 12mm screws

Print with PLA or PETG, 3 walls. Make sure you have enough layers at the bottom for strength. You may need a brim to prevent them coming un-stuck while printing.

The two sides are identical - one is just mirrored.

Tags