Air-cooled phone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My overkill phone stand idea with 2x4010 fans for the ones who like to keep their displays always on (ME) with YouTube
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v3.0
OK, this might look like a bit overkill, i know… It's just i need my phone to be cooler as it's been on for like 10-12 hours a day while i'm working.
So, i'll upload 2 different versions of the files, ones are for the thinner version in case you don't want the decorative grills with the logo and not waste too much material for the base.
Bare in mind, all the files are for a phone with the dimensions of a Lenovo Legion Duel Phone,
78x170x12 mm, everything bigger than this will need some changes in the dimensions of the cage.
Now, the stand is air-cooled with 2x4010 fans , i bought them from AlliExpress, they all are the same chassis, the fit to the cage is snug enough to not need any additional hardware. Nominal voltage for mine is 5V as i'm using it plugged on my PC.
Printed on the Ender 3 V3 XZ with 0.32mm and 10% infill in Geeetech color shift PLA(base and pin) and Silk blue PLA from 3DFils (main cage).
Oh, and it's rotational!
Have fun!
P.S. Leave a like if you, that really encourages me.