2-part Bobbin 9033P (Pfaff) for FFF/FDM printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bobbin designed as 2 parts so it can lay flat on the bed Use superglue to assemble, the thread tension can push it apart
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 135
- Wydruki
- 3
- Wyświetlenia
- 715
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Several tolerances are available, the number behind the name represents the tolerance on ONE side of the diameter. Meaning that a tolerance of 0.1 is in actuality 0.2 mm smaller than the diameter it must fit into.
*Use superglue to assemble the bobbins. I've had it happen that the tension of the thread separates the 2 parts even though there was a good press fit.
9033P bobbin for my Pfaff Hobbymatic 807
Should be compatible with Pfaff Sewing Machine Models 90, 91, 92, 93, 94, 95, 96, 97, 130, 138, 229, 230, 234, 238, 259, 260, 261, 262, 284, 285, 285-1, 294, 295, 295-1, 296, 296-1, 297, 297-1, 300E, 331, 332, 333, 335, 360, 362, 368, 437, 438, 439, 463, 480, 801, 803, 806, 807, 809, 875, 876, 900, 904, 905, 906, 907, 916, 917, 919, 919-1, 927, 933, 935, 939, 946, 947, 953, 955, 975, 1000, 1011, 1013, 1014, 1015, 1018, 1019, 1027, 1029, 1035, 1037, 1047, 1050, 1051, 1067, 1069, 1071, 1100, 1147, 1150, 115