2-part Bobbin 9033P (Pfaff) for FFF/FDM printing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bobbin designed as 2 parts so it can lay flat on the bed Use superglue to assemble, the thread tension can push it apart
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 135
- Makes
- 3
- Views
- 716
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Several tolerances are available, the number behind the name represents the tolerance on ONE side of the diameter. Meaning that a tolerance of 0.1 is in actuality 0.2 mm smaller than the diameter it must fit into.
*Use superglue to assemble the bobbins. I've had it happen that the tension of the thread separates the 2 parts even though there was a good press fit.
9033P bobbin for my Pfaff Hobbymatic 807
Should be compatible with Pfaff Sewing Machine Models 90, 91, 92, 93, 94, 95, 96, 97, 130, 138, 229, 230, 234, 238, 259, 260, 261, 262, 284, 285, 285-1, 294, 295, 295-1, 296, 296-1, 297, 297-1, 300E, 331, 332, 333, 335, 360, 362, 368, 437, 438, 439, 463, 480, 801, 803, 806, 807, 809, 875, 876, 900, 904, 905, 906, 907, 916, 917, 919, 919-1, 927, 933, 935, 939, 946, 947, 953, 955, 975, 1000, 1011, 1013, 1014, 1015, 1018, 1019, 1027, 1029, 1035, 1037, 1047, 1050, 1051, 1067, 1069, 1071, 1100, 1147, 1150, 115