Fully Printed Estes Rockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully printed, Estes motor compatible, rocket ecosystem. Body, nosecone, fuselage and launching base.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Share Alike
Launching rockets was something that I had done when I was little with my dad and grandfather. Two decades later, I wanted to relive that so I designed this rocket from scratch. It uses either a C or E class motor, (more sizes can be added if requested) and a modular build structure.
For the rocket, I used PLA pro at 220C / 0.2mm nozzle / 2 walls & top and bottom / 10% infill
For the base, I used PLA pro at 220C / 0.2mm nozzle / 4 wall & top and bottom / 30% infill
The base is strong enough for a full size adult to sit on it. The E12 rocket has survived multiple passes and the C6s I have yet to track any down after the launch.
