1 / 2
sE Electronics (sE 4400, 4100, T2, T1) Shock Mount Popfilter Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the original gooseneck on the sE Electronics pop filter with a clip that goes onto the base of the shock mount.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
To use this you have to remove the nut that secures the pop filter to the gooseneck, the pop filter tang is then to be glued into the printed clip.
The clip, clips around the microphone locking screw and should stay very secure. Say goodbye to drooping and in the way goosenecks!