Filament Drier / Drybox Platform for Official Prusa Mini Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Platform for various filament driers or dryboxes.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello there,
I built these platforms to hold my Sunlu filament dryer, but figured y'all might find use for it as well. The platforms were originally cantilevered off of the side of the enclosure, and held a 1 kg filament successfully, but to avoid any deformation I extended legs down to the floor. The legs use 2 of the remaining foam feet from your enclosure, which will compensate for any misalignments. Use 4x M3x12mm screws (the one from the enclosure kit will work well).
I printed the platform in Polymaker Sunset Orange PLA, with a 0.8mm nozzle @ 0.5mm layer height.
The right side has a cutout for cables