Nozzle-can (fan shorud)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was my first attempt at a nozzle-cam holder. It is much easier to mount and a much shorter print as it is only…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This was my first attempt at a nozzle-cam holder. It is much easier to mount and a much shorter print as it is only the fan shroud.
However it puts the endoscope way too close to the nozzle causing it to be very blurry. but still useful to see if it is extruding or not. The pla version had a tendency to droop after a while needing to be replaced.
If you can, use the version integrated in the body (https://www.thingiverse.com/thing:4304330) which is superior in many ways but requires printing and installing the whole back-housing.
If you know of super short focal length endoscopes or ways to change it let me know.
Category: 3D Printer Parts