Nozzle-can (fan shorud)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was my first attempt at a nozzle-cam holder. It is much easier to mount and a much shorter print as it is only…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This was my first attempt at a nozzle-cam holder. It is much easier to mount and a much shorter print as it is only the fan shroud.
However it puts the endoscope way too close to the nozzle causing it to be very blurry. but still useful to see if it is extruding or not. The pla version had a tendency to droop after a while needing to be replaced.
If you can, use the version integrated in the body (https://www.thingiverse.com/thing:4304330) which is superior in many ways but requires printing and installing the whole back-housing.
If you know of super short focal length endoscopes or ways to change it let me know.
Category: 3D Printer Parts