Sunringle Düroc MTB wheel axle nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,43 € – 0,53 € netto (bez VAT)
Dla pliku: Sunringle Duroc axle nut.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,48 € netto (środek widełek).
- Masa podana przez autora
- 4 g
- Czas druku podany przez autora
- 34,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
small tool for my E-MTB wheel
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
My Orbea Wild FS 40 has Sunringle Düroc 40 wheels.
To get the freehub loose you have to hold the axle on the brake disk side and loose the freehub nut.
The axle has notches, bike garages held the axle with screwdrivers and thats why the notches are hurt already.
I created a small tool that fits into the notches and can be held with a wrench or a ½" ratchet.
There are not many NM torque on the freehub nut, so the tool printed in PLA survives a couple of loosen and tighten actions.