Wheely Bar Assambly 1/16 replacement for PN 16120
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on the designing a replacement for 1/16 scale HyperGo wheely bar assembly, PN 16120, compatible with many models
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I recommend using the compact version, it uses 2 less screws and its more durable.
There is a version with separate parts if fits you better.
There are no adjustment for the position of the wheels, if you want it lower or higher, print bigger/smaller wheels.
The Wheels are not my design, i took them from here https://www.thingiverse.com/thing:6420415
I have printed in PLA, but they broke pretty easy, when the car tumbled on them.
The ones in the pictures are printed in TPU, frame and wheels, and the wheels axel in PLA.
The holes are 2.5mm screws, for PLA parts be fery careful with the first screw in, it needs to be perfectly straight so it can build its thread well, otherwize PLA will break easy.
Printing with TPU advice: Hight temp 235C, very slow, 40mm/s max, very low max cooling, under 50%, dont care too much about stringing, it can be cleaned afterwards. i used Creality TPU White.
Frame printed with supports, snug, 20%overhang. i didnt even removed the supports under the middle link.
I hope you enjoy it