Starlink mini integrated battery supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Integrated dual Makita Battery supply with under voltage protection and GoPro connector - pls leave a like :)
- Ocena
- 0 / 5
- Polubienia
- 141
- Pobrania
- 796
- Wydruki
- 2
- Wyświetlenia
- 11 698
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Pls leave a like for the model - its a simple contribution for the work - THX
Print with durable material (PETG, ASA etc.) if you want to use the GoPro connector, consider using 20%-25% infill for printing.
2 Versions available one will use the spaces in the mini dishy to better protect against falling off, however that version needs to be printed with base plate support.
Using diods in the + wire from each battery is highly recommended to avoid short circuits when only using one battery and also to avoid power distribution between the batteries in case they are unevenly charged.
The under voltage protector needs to be adjusted a bit on the upper left to fit, but easy to do.
The switch from the Makita connectors can be repurposed in the build
Under voltage protector:
https://www.amazon.de/dp/B0BCV67M8N?psc=1&ref=ppx_yo2ov_dt_b_product_details
(see comments on Amazon for how to setup)
Battery connetcors:
https://www.amazon.de/gp/product/B0C2V8VSZC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1