1 / 1
Nanoleaf Lines for ledconnectors and led strips with a waterproof layer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made some adjustments, so i could fit my waterproof led strip lights on the model.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
These can also be used with led connectors if you don't want to solder.
- Wire the led strips up like normal
- Rub some acetone on the lines (not too much)
- Take off the piece of film under the strip and place it on the lines
- Glue the lines on to the side of the hex bases (You might have to cut the corners of the lines to fit them)
