1 / 1
Nanoleaf Lines for ledconnectors and led strips with a waterproof layer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made some adjustments, so i could fit my waterproof led strip lights on the model.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 68
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These can also be used with led connectors if you don't want to solder.
- Wire the led strips up like normal
- Rub some acetone on the lines (not too much)
- Take off the piece of film under the strip and place it on the lines
- Glue the lines on to the side of the hex bases (You might have to cut the corners of the lines to fit them)
