Raymarine tiller autopilot bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a slim solution for the Raymarine tiller autopilots
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Raymarine EV100 or ST1000 mounting solution
On my boat there used to be something extremely anoying and dangerous in the cockpit. A piece of square bar welded to a base plate which was bolted onto the side of the cockpit wall. You'd bump in there all the time and the final straw was an injury of someone falling on to it.
I designed this smooth dovetail solution which enables me to use both the ST1000 and the EV100 models. I have both on board. I prefer the first one on engine, it steers us dead straight through narrow canals. The EV100 model is better at sea. Usually we tend to switch to our Aries windvane though.
Disclaimer
My models are always tested on my own boat. We are currently cruising to the Caribbean and you can therefor assume that we load up the part properly. It is however your own responsibility to use these parts when heading out to sea. Use common sense and print spares if you are not able to print onboard. Especially on longer passages.
Remix
Please remix however you like. If you are not able to design your own parts I do offer a modification service to those in need. A contribution for my effort is however expected. Send me a message on Noforgeinland and I am sure we will figure something out.
https://www.noforeignland.com/boat/sya