Samsung Galaxy Tab A9+ Wall-Mount Case - home assistant use
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Samsung Tab A9+ with two cable hole options: bottom or backside. Perfect for home assistant wall setups.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 274
- Wydruki
- 0
- Wyświetlenia
- 1957
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This wall-mount case is designed specifically for the Samsung Galaxy Tab A9+, providing a snug fit so your tablet stays secure. It’s perfect for creating a home assistant panel or an in-home media hub. There are two versions included:
1. Bottom Hole Version – Ideal when using a 90° USB charging cable routed through the bottom to a wall power adapter.
2. Back Hole Version – Allows you to route the cable directly through the back of the case if your wall outlet is behind the tablet.
There are two versions of this case: a single-piece design for larger printers and a two-piece design for small form factor printers. Both work identically, but the two-piece version requires a few more screws.
No matter which version you choose, the case is quick to print and easy to install.
Hardware needed:
4x M3 x 10mm screw DIN 912 (example)
1x USB-C cable 90 degree (example)
For two piece version you need additional 7x screws.
Printing Recommendations
• Material: PLA or PETG (suitable for indoor use)
• Layer Height: 0.2 mm
• Perimeters: 2
• Supports: Not required
Enjoy a sleek, minimal design that keeps your Galaxy Tab A9+ within easy reach, whether you’re using it as a smart home controller or simply want a clean, wall-mounted look.
If you like my work please support me. :-) Buy me coffee at ko-fi.