CREALITY K1C SLIM HINGED RISER USES STOCK HARDWARE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
K1C SLIM HING RISER USES STOCK HARDWARE NO DAMAGE! AND LESS NOISE FROM PRINT HEAD CRASHING INTO THE RISER
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 683
- Wydruki
- 4
- Wyświetlenia
- 2494
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Standard Digital File License
NEW!!! UPDATED! ADDED SEALED FRONT AND REAR BETWEENERS!
CREALITY K1C SLIM HINGED RISER USES STOCK HARDWARE
SLIM, LESS TO NO DAMAGE! AND NOISE FROM PRINT HEAD CRASHING INTO THE R/F (camera) CORNER DOES NOT HIT NOWHERE NEAR AS HARD AS ANY OF THE OTHERS I HAVE FOUND ONLINE! THIS RISER MAKES PRINTING WITH MY K1C SO MUCH MORE ENJOYABLE WITHOUT THE WORRY ABOUT BREAKING ANYTHING! PLUS THIS KIT USES THE STOCK SCREWS IN THE TOP OF YOUR K1C
I recently printed a couple different risers and had issues with the print head hitting pretty hard (the corner where the camera is located) THE LAST TIME CAUSING MY PRINT TO FAIL! Thats the reason I designed the new Riser! this riser uses stock hardware just unscrew the install the riser and screw all 4 corners I like the hex sides from https://www.printables.com/model/770238 so I incorporated the hex pattern into my design. I Take NO! Credit for the Handle This is from https://www.printables.com/model/934697 Thanks To those Makers for the Idea's!
IF YOU LIKE MY DESIGN LETS SEE SOME MAKES AND LIKES!!!!
THANKS HAPPY PRINTING!