Pikachu Planter - 65mm inner diameter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ive got another request from my gf, that she now wanted another Planter, this time with Pikachu.
- Ocena
- 4,8 / 5
- Polubienia
- 103
- Pobrania
- 494
- Wydruki
- 7
- Wyświetlenia
- 2382
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ive got another request from my gf, that she now wanted another Planter, this time with Pikachu.
So i went and took this model, tuned the triangle count down so the model was around ~2mb, uploaded it to tinkercad (im learning Fusion 360 right now, but for a fast edit im still always falling back to tinkercad), added the 65mm pot, and resized the pikachu according to that.
I did consider printing it without the tail, and glueing the tail back on, but after all i didnt care enough.
I posted pictures of the final weight, and of the weight of the support in the end. After all you lose around 1/3 of the weight of the print in the support structures.
Print instructions
Category: Outdoor & Garden Print Settings
Printer Brand: TEVO
Printer: Tornado
Rafts: No
Supports: Yes
Resolution: 0.3
Infill: 7%
Filament: Owl Filament PLA Transparent Yellow
Notes:
There is a lot of stringing in the photos, thats due to im still to lazy to tune that any more. I just deal with the cleanup. ;-)
Printing time was 11 hours and 48 minutes @50mm/s and a layer height of 0.3.