Pikachu Planter - 65mm inner diameter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ive got another request from my gf, that she now wanted another Planter, this time with Pikachu.
- Rating
- 4.8 / 5
- Likes
- 103
- Downloads
- 494
- Makes
- 7
- Views
- 2,382
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ive got another request from my gf, that she now wanted another Planter, this time with Pikachu.
So i went and took this model, tuned the triangle count down so the model was around ~2mb, uploaded it to tinkercad (im learning Fusion 360 right now, but for a fast edit im still always falling back to tinkercad), added the 65mm pot, and resized the pikachu according to that.
I did consider printing it without the tail, and glueing the tail back on, but after all i didnt care enough.
I posted pictures of the final weight, and of the weight of the support in the end. After all you lose around 1/3 of the weight of the print in the support structures.
Print instructions
Category: Outdoor & Garden Print Settings
Printer Brand: TEVO
Printer: Tornado
Rafts: No
Supports: Yes
Resolution: 0.3
Infill: 7%
Filament: Owl Filament PLA Transparent Yellow
Notes:
There is a lot of stringing in the photos, thats due to im still to lazy to tune that any more. I just deal with the cleanup. ;-)
Printing time was 11 hours and 48 minutes @50mm/s and a layer height of 0.3.