Holder for 2x 140mm FANs to speed air circulation from Heater.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is what it looks like, holder for 2x 140 mm Fans. Friend needed them to blow hot air under the heater faster...
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 54
- Wydruki
- 2
- Wyświetlenia
- 682
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder for 2x 140 mm Fan, stick it under radiator to speed up hot air distribution. The model is symmetrical and snap fit. Using 4x pegs to mate the two halves… once joined I had hard time to split it again without breaking it.
You get multiple length of legs to fit under your heater. Legs can be taken out and in. On the side is a channel and hole for zip ties if you decide for some cable management…
To mount the FANs use the same screws you would to mount it to the case, the short fat ones.