Bambu X1C FLSUN SR LGX Lite Direct Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All in one House Effector for Flsun Superracer with X1C Bambu hotend and LGX lite
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 85
- Wydruki
- 2
- Wyświetlenia
- 730
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
All-in-one House/effector for the FLSUN Superracer with LGX Lite Extruder and X1C Bambu Hotend
Added step file House/effector
Updated: Added Adapter for BTT ADXL345 V2.0 Accelerometer
[adxl345]
cs_pin: PIS:gpio9
spi_software_sclk_pin: PIS:gpio10
spi_software_mosi_pin: PIS:gpio11
spi_software_miso_pin: PIS:gpio8
axes_map: -x,-y,-z
Use 2510 fan 24V (Not use original fan X1, it is 5V)
Use Original EndBalls (Make sure to insert by pressing fully)
Use Brass Inserts M3
First Mount X1 Hotend with 2510 fan and two M3 Screws fit to Effector-house (easy mount/remove)
provided mount ADXL accelerometer
Compatible Original fan 4010f or 5015 or CPAP
Print Setting:
0.2 Layer (0.14 for Duct)
20% Infill
3 wall 3 Top 3 Bottom
Supports Yes (on Build plate only)
Duct no need supports
Best ASA or ABS (if enclosure)