1 / 4
Phone mount for tripods and other things with a screw hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to easily and securely mount your phone to a 3D printed tripod, or a tripod adapter.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1082
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
Mount your phone to anything you can make a hole in. Has grooves for a rubber band, to improve friction, but works best with phones in cases. should be fine for phones 65 - 92mm wide
Uses M5 screws with 8mm hex heads. There is a space for up to ~14.5mm washer to prevent the sliding mechanism from wearing out by the pressure from the screw head (4th photo) I use 20 and 16mm long screws, but the backside one can be even shorter. For ease of use, install wingnuts.