Gutter Light Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Christmas lights or other outdoor lights / cables. Fits gutters with straight walls or a folded lip. ASA or PETG.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 489
- Wydruki
- 3
- Wyświetlenia
- 2068
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a clip that fit my gutters which had a folded channel on the inner lip. It will also fit on a plain flat surface. It has a strong holding force even on a flat surface, and clips extremely well on my gutters. Could be used on a patio or pergola to hold other variety of lights, but I used it for Christmas lights.
I printed these in ASA and they are firm but flexible. PETG would work as well. I have not tested PLA - it may be too rigid for gutters. You need some flexibility.
0% infill and 3 perimeters on Prusa 0.3mm stock profile (uses 0.5mm line width). You can also use 0.2mm profile with 15% infill.