Magnetic Multiturn Potentiometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Potentiometer with AS5600 sensor.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a WIP (not yet printed, since I do not have the AS5600 boards) of an enclosure for the AS5600 breakout board with axle. It can replace a mechanical potentiometer as well as an incremental or (with some additional software) absolute encoder for robotics or RC-controls.
The AS5600 board may be fixed with hotglue or 4 small screws. Since I have no boards here, I don't know the exact hole positions. When I receive the board, I will publish a v2 with holes/threads to fix the board.
The cable is guided through the bottom part. The four holes in the bottom part can be equipped with screws so that the top can not be screwed the full way down, thus allowing to adjust the distance between sensor and magnet. The mounting thread is a standard M10x1, the same as standard pots have.
The axles come in type A or B, depending on which type of magnet you are going to use. The axle is secured by a retaining ring.