LACK Reinforced LOWER door hinges (redesigned for 3/8" acrylic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
reinforced and also narrowed the panel opening from ~3mm to 2.4mm which gave me a snug fit on the 3/8" panels I used.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
** New to 3d modeling. This is the first model I'm sharing publicly. CONSTRUCTIVE CRITICISM WELCOME :) **
Maybe I'm unlucky or too rough during the build process, but i broke at least 3 of these guys and the pole coming off the lower leg that accepts the hinges in the original design.
I decided to reinforce it while waiting for the new leg to print… Decided to share the model i ended up with for others. Used a small dab of hot glue to secure the panels in place (peace of mind that my gorilla hands won't tear the panel off the hinges).
Also sharing the f3d file used if you want tinker with the design further.