S2DW mounts for Sprite Extruder and heatbed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mounts for S2DW accelerometers (ADXL345 would work to if the holes are the same) for Sprite Extruder.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 363
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These are 2 mounts for S2DW accelerometers for Input shaping in Klipper systems. I made it for Sprite Pro extruders and Ender3 based printers with magnetic bed (don't have glass bed so I can't test it).
Change the print position of Y mount for printing without supports.
Holes are 15.5mm appart for mounting S2DW so if your ADXL345 has same mount holes, it should be compatible, too.
Extruder mount has positions for 4 x 6mm magnets to keep down vibrations, but I don't know if they make some trouble for S2DW measurements.
Beside those 2 models, you need to print an extra primitive cube with dimensions 48.9 x 9.9 x 3 mm , depending on the precision of you printer. This cube is meant for protection, so screws do not directly press on the plate.
And you should have 4 x M3 5mm screws for mounting the parts.