S2DW mounts for Sprite Extruder and heatbed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mounts for S2DW accelerometers (ADXL345 would work to if the holes are the same) for Sprite Extruder.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 71
- Makes
- 1
- Views
- 363
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
These are 2 mounts for S2DW accelerometers for Input shaping in Klipper systems. I made it for Sprite Pro extruders and Ender3 based printers with magnetic bed (don't have glass bed so I can't test it).
Change the print position of Y mount for printing without supports.
Holes are 15.5mm appart for mounting S2DW so if your ADXL345 has same mount holes, it should be compatible, too.
Extruder mount has positions for 4 x 6mm magnets to keep down vibrations, but I don't know if they make some trouble for S2DW measurements.
Beside those 2 models, you need to print an extra primitive cube with dimensions 48.9 x 9.9 x 3 mm , depending on the precision of you printer. This cube is meant for protection, so screws do not directly press on the plate.
And you should have 4 x M3 5mm screws for mounting the parts.