Filament Welder Remix for 4mm PTFE Tubing - Easy Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I only had 4mm Capricorn tubing on hand so I remixed this to allow for that.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I only had 4mm Capricorn tubing on hand so I remixed this to allow for that as well as removing overhangs greater than 55 degrees to make it easier to print. I had to heat a little longer with the thicker walls but I also had to allow it to cool longer so overall, if you have 3mm tubing on hand, it's probably better to use that. Still, this worked pretty well once I got the hang of it.
Thanks very much to coffee_sugar_cinnamon for the original design!
Happy Printing!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.2mm
Infill:
20-30%
Notes:
As coffee_sugar_cinnamon said, you have to bend the PTFE tube to get it to fit, I found it easier to insert one side all the way in first.
Category: 3D Printer Accessories