1 / 3
Tidbit Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case, Foam, and acrylic designs for the Tidbit 19 key numpad from Nullbits
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
This is a case I designed for the nullbits Tidbit, which is a 19 key macropad/numpad. This design matches that of the case I made for my Lily58 Pro. I believe it will work with the included screws and standoffs. The feet are 10mm diameter.
I have also included files for the acrylic cover which I used to make a tinted version of the included cover, and for case foam layers to dampen the sound. I recommend using a laser cutter and 2mm thick EVA foam.
Printing Tips
I have included a 3mf file with my recommended printing settings
- supports helped to create cleaner overhangs but are not required
- at .1mm layer height (or lower) the counterbore holes underneath will print in a stair-like pattern which works better without supports
- the only difference between my print pictured and the included file is the shape of the infill-only area on the bottom