Planter Post Cap for 4x4 fence post
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For displaying potted plants on top of 4x4 fence posts up to 10.5"
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Fence post cap for planters that can support any item up to 10.5" round footprint. fits a 4x4 post snug, has 4 small notches for nails/screws for added support. Drains well and wont flood your planters in heavy rain, and it has an inner recessed ring for keeping smaller pots from sliding off in heavy wind.
Recommended Printing:
Gcode for MK3s in files with with backup lightweight supports.
(for non-MK3s) 0.4 nozzle, PETG, 3 walls minimum, 5 top layers, auto organic supports.
***Use the “Bridge testing” file first! this print involves a 3.6"^2 bridge near the end of the print. printing without the hassle of PETG supports, your bridging needs to be -very- well tuned. the included bridge test can be scaled to any size to test bridging distances with or without supports. I use Thick bridges, 10mm/s bridge speed, 100% cooling, and a 1.2 bridge flow ratio and can print this without support.