1 / 1
Reolink Doorbell Camera door reveal cable offset mount.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts the doorbell on the wall where a reveal exists with routing back to the frame for the original doorbell wire.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
Probably only useful in a very few situations but I thought I would share anyway. This allows the placement of the camera offset by a few mm to allow cable to pass around the corner and through the back of the mount. This is for a reveal of 165 mm, but you can scale the model when slicing to achieve a longer or shorter length.
