Nürburgring Logo "Connected"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliced some negatives to connect it with 4mm rods
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I put 4mm holes in the track and the track name to connect them all.
I used 4mm plexi/acryl-glass rods and cut them to the required length.
The Files are 3MFs and Twisted for Texture or Carbon Surface in my case.
Sliced the track in two files and put the trackname in one
Also put some hanging holes in the back.
The track is printed with iBoss PLA+ Silk Silver on textured sheet.
Letters printed with Eryone PLA Ultra Silk Red on PET-Carbonfiber sheet.
Do not mix up the letters after printing otherwise the spacing may no longer fit
You can find the lengths and the quantity you need here:
2x 30mm
4x 20mm
1x 18mm
17x 15mm
2x 8mm
1x 7mm
From the photos you can see where which rods go
I used some glue to strengthen it
Have fun with it and Happy Printing
Thanks @ Tibor Csobolya for the Original Design!