Magnetic Quest 3 Vive Tracker/Tundra Tracker Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic mount and plate that attaches a Vive Tracker/Tundra Tracker to your Quest 3.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1027
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
A magnetic mount and plate that attaches a Vive Tracker/Tundra Tracker to your Quest 3.
Original Model by cucumberworks: Quest 3 Vive Tracker/Tundra Tracker Mount
This requires additional hardware to assemble.
- (8) x 6x3mm Round Magnets - eg: https://a.co/d/iTddhw0
- (1) x 1/4-20 3/8" Flat Head Socket Screw - eg: https://a.co/d/7oJjdCD
Attach the peg to the Plate using superglue or similar.
Attach magnets using superglue or similar. Make sure they're in the right direction!
Use screw to attach plate to tracker and strong 3M tape to attach mount to Quest 3.
The screw will be compress the extra material in the hole for a snug fit. To ensure the plate is strong enough, you may want to use more infill than normal (70% or more).
You can optionally sand parts for a better fit, like shown in some of the pictures.
All the parts can be printed without supports.
Tested with Vive Tracker 3.0 and Tundra Tracker using PLA/PLA+.