1 / 3
Bicycle Light Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for handlebars to attach a light holder
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter was designed to attach a light to the handlebar of a bicycle. The diameter of the holder is 32 mm. This model is only the clamp around the handlebar. The actual mount for the light is an original part from the light itself. My handlebar adapter allows to attach the original mount by using a screw.
Print Settings
Material: PLA
Infill: 15%
Infill Pattern: 3D Honeycomb
Additional Material
- 1x Nut M4
- 2x Nut M5
- 1x Screw M4x10
- 2x Screw M5x20 or longer
Change Log
- Width of the parts has been revised, now the parts are shaped equally