70mm x 70mm x 8mm Desiccant Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Sovol 3D Compatible (or any place that it will fit) box to hold desiccant. 4x bins fit into the bottom of the drier.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Ensure bed adhesion is not too strong as it may snap the super thin and long slots, use a metal thin scraper to remove if needed.
Nothing special to print all overhangs are 45 deg or less.
The lid snaps in place in the four corners thicker side goes inside. The last corner is a bit tricky but they dont pop out.
These slide into the base of the sovol 3d desiccant drier with fan but can be used anywhere. Tested with standard overture filament spool and a bamboo labs spool holder and they clear without issue.