1 / 2
Sea of Thieves Collector's Chest
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Finally a SOT chest in easy filament printable design! CAD files included so you can add your own variation.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 618
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (30)Powiązane
Designed for filament printability:
- Smooth flat bottom for strong buildplate adhesion
- Limited overhangs wherever possible to 60 degrees
- Solid, watertight model without errors
- Does NOT open
- NO booty inside :-(
Recommended Slicer settings:
- 2 walls/shells, Inside to Outside
- Z Seam: Sharpest corner, Hide
- 4 Top layers, 3 Bottom
- Travel: Not On Outer Surface
- Concentric top/bottom layer pattern
- Infill: 15%, Grid Pattern, Gradual infill steps = 2, Gradual infill step height = 5mm
- Infill: Skin Edge Support Layers = 2
- Experimental (At least in Cura): Make Overhangs Printable, Maximum Model Angle = 60 degrees
Scaling larger should not be a problem as it's 1 piece