Liczymy pasujące modele…
AirTags are a great way to keep track of your valuables, especially while traveling. An AirTag thrown in your suitcase, or hanging from the handle of your bag will provide some peace of mind, and make it easy to recover misplaced luggage,…
Pulled from the game Sea of Thieves and repaired for printing.
This is a remix of the Sea of Thieves Megalodon by mordekain . I smoothed out a lot of the model to remove the semi-low poly look of the original and split it into pieces for easier printing. A very minimal amount of supports are needed…
Here is the Model for my Barrel that I made after being inspired by playing Sea of Thieves there is the option of either a standard lid or a Money Box Lid lid to store your booty Both are a screw fit and is a nice secure fit once…
The Chest of Legends from Sea of Thieves. Printing: For best print results, print the emblem and chest separate. I have provided the chest without the emblem (chest-of-legends-no-emblem.stl) and standalone emblem…
I designed this in Fusion 360 and designed it to be printed without supports. The files should print properly without you having to rotate anything. When I printed it, I used a variable layer thickness for certain layers of the parts to…
I made this coin from Sea Of Thieves a while ago, but never uploaded it here… Stupid! So here you go! I hope you like it, and post a Make if you recreated it! This model can be printed without support, flat on the buildplate.
Haven´t found a model for the Ashen Key and wanted to try this a small asset for my new sla printer. Printed on a Elegoo Mars 2 Mono
Doporučuji zapnutí funkce “umožnit tisk převisů” A nebo tisk Podpěr :)
Easy to print Ashen Chest Key from Sea of Thieves (SoT) Three versions of the model is available to print: AshenKeyFlatBottom is for FDM printing, bottom is flat so no supports needed and it prints fast at 45 minutes at 0.2mm…
This is a simple Sea of Thieves themed keyboard key that fits most mechanical keyboards. I recommend printing with a .4 or smaller nozzle and at half layer height to get the best result and detail. Best printed in one color and painted if…
A simple model I made from the game: Sea Of Thieves, I hope you like it! If you have printed it, post a Make! I would love to see it.
This is a remix of Micahol's Sea of Thieves gunpowder barrel. I've chopped it up for easier printing - you need 2x of Side.stl & 2x Pin.stl to make for easier alignment while gluing, and one of everything else. Stencil.stl is a thin…
The key to unlock the loot in the Skeleton Fort!
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the elusive and prized Stormfish found across the Sea of Thieves. Can be placed on a wall as is or via a plaque…
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the elusive Wrecker fish found across the Sea of Thieves. Can be placed on a wall as is or via a plaque (coming…
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the Common Spashtail fish found all across the Sea of Thieves. Can be placed on a wall as is or via a plaque…
Sea of Thieves coaster - Skull Diameter : 100 mm Sous verre Sea of Thieves - Crâne Diamètre : 100 mm
model fixed for better printing
sea of thieves PS5. Xbox Controller stand remix
Friend of mine wanted a shield of Athena, i could not find any File,so i took it upon myself to get the model. its the Original Model from Sea of Thieves so enjoy :D, Picture is coming soon as im Printing this myself right now
Sea of Thieves standing logo for desk or can be sliced down from behind to make a sign or plate. The model with the Sea Blue outline is the original model size that was printed on an Ender 3 Max Neo. The one in Blood Red outline is at 75%…
just print and stick together ..the skull fits into a grove on its pedestal but the feet just stick on so just centre them ..standing the model up on the pedestal and just sliding the feet in under seems to be the best way to make sure…
I pulled this directly from the game files.
ship crest of the voyager
Sea of Thieves coaster - The Reapers Bones Unearthed Diameter : 100 mm Sous verre Sea of Thieves - Les os de la faucheuse font surface Diamètre : 100 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
For a better result I recommend cutting the model in half and then gluing it.
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the tough and hearty Battlegill found across the Sea of Thieves. Can be placed on a wall as is or via a plaque…
Sea of Thieves coaster - The Goal Hoarders Diameter : 100 mm Sous verre Sea of Thieves - Les collectionneurs d'or Diamètre : 100 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20…
the cat model is the lodestar cat, if you have a request just message me!
Designed for filament printability: Smooth flat bottom for strong buildplate adhesion Limited overhangs wherever possible to 60 degrees Solid, watertight model without errors Does NOT open NO booty inside :-( Recommended Slicer settings:…
have fun with this and put it were ever you want but i would recommend a gold or translucent yellow filament for this one
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the average Ancientscale found across the Sea of Thieves. Can be placed on a wall as is or via a plaque (coming…
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the pretty Plentifin found across the Sea of Thieves. Can be placed on a wall as is or via a plaque (coming soon),…
Reel in too many and want something to show for it? Look no further, this fish is for you. This sculpted model is based on the vicious Devilfish found across the Sea of Thieves. Can be placed on a wall as is or via a plaque (coming soon),…
Sea of Thieves coaster - The Merchant Alliance Diameter : 100 mm Sous verre Sea of Thieves - L'alliance des marchands Diamètre : 100 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20…
Check out my star wars models as well as FRC robot files. full R2D2 model on the way. -All made on Onshape
Sea of Thieves coaster - The Hunter Call Diameter : 100 mm Sous verre Sea of Thieves - L'appel du Chasseur Diamètre : 100 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
Simple model to print it, little bit of support will help to get better result. Sculpted in Blender, Printed on Anycubic i3 mega 0.2mm PLA
adapted and slightly tweaked model for easier 3d printing all parts have flat or almost flat side that supposed to lay on printbed except sails all parts should print fine with no supports important due to way i split parts its crucial to…
Light up stronghold key from Sea of Thieves. Printed on a Bambu Lab X1C in 3 color (white for the eyes). Model Details: 0.2 Layer Height Supports Required Lights Used:…
This is a replica of the Old Sailor's Key from the video game "Sea of Thieves." It is the key used to unlock the Pirate Lord's secret cash inside the Magpie’s Fortune, which holds thousands of gold coins in "The Maiden Voyage." I printed…
This Sea of Thieves Coaster will go well with any tankard in your collection but for better results I recomend that resize you print between 80mm and 100mm of diamter. More soon on this collection! ;) Now pirates.. go and conquer the seas!
I made this dice to help you decide what to do on your next voyage
Rowboat a'la sea of thieves in dry dock on rocks Category: Sculptures
Throwing knife from the Dark Warsmith set.
Found/made these to replace the cheap cardboard cut out coins that most games have nowadays. Consist of 4 coins 30mm x 3mm copper coin (10) 35mm x 3mm silver coin (20) 40mm x 3mm gold coin (50) 45mm x 3mm plat. coin (100) (These are a…
break the fin and glue the armor on
Sea of Thieves coaster - Order of Souls Diameter : 100 mm Sous verre Sea of Thieves - L'ordre des âmes Diamètre : 100 mm
The gold Hoarder key from the video game sea of thieves
Designed for filament printability: Smooth flat bottom for strong buildplate adhesion Limited overhangs where I could to 60 degrees Solid, watertight model without errors Jewel clearance of 0.2mm Recommended Slicer settings: 2…
Printed in eSun PLA+, zero supports. Turn ironing on and no sanding necessary. Finish with silver Rub ‘n Buff to high shine then add a wash of black acrylic paint. Back with a square of 3M double-sided tape and screw on cover buckle’s…
Sea of Thieves coaster - Sea Dogs Diameter : 100 mm Sous verre Sea of Thieves - Sea Dogs Diamètre : 100 mm
For anyone who wants to get it in game you must first reach level 50 in the athenas fortune emmisary (not hourglass) AND you must also complete the knife wielding natural commendation. To complete this commendation you must: Defeat 150…
Cheese Thieves MMU ready Die gelben Käsestücke können direkt in der MMU gedruckt werden, bei der Originalvariante, sind diese kleiner und fallen dann raus.
Dark Warsmith Cutlass from the Dark Warsmith set in Sea of thieves.
A skull of the kraken from sea of thieves.
This is based on the Red Mage Dagger from D&D lore as seen in "Honor among Thieves". I sculpted this in Blender based on a single reference image, and I am happy with how it turned out. Print Settings Rafts: No Supports: No Resolution:…
King's Ransom Throwing Knife from sea of thieves
Resized the holes of the original to 10.2mm so it can be assembled with 10mm dowels or M10 threaded rod. I made mine with wood dowel for the locator holes, and M10 threaded rod for the through hole. Made it feel nice and heavy.
A model of the kraken from sea of thieves.
Storage box for the Carcassonne Expansion 4: Towers and Thieves Box is designed for the 2025 renewed edition (C3.1). See here for the box made for classic Carcassonne editions (C1 and C2) → Box layout: Slot for 12 land tiles with thief…
This is a replica of figure D from the box "Thieves", number 2008 from Grenadier (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:G-asfs-2008d.jpg&oldid=185805 ) "Female Thief". Reproduced using…
This a paid design from @mi_replica_3d on here as well as IG. They agreed that I was allowed to post this for others to
Royal Sovereign Tankard from Sea of Thieves. Mini designed for display but can be scaled up to life size or however you see fit. If you have any problems with the files, questions, or concerns don't hesitate to reach out to me :)
Climbing Cheese Thieves Mice This comic image can be hung on a door or on a shelf. The thing consists of two parts. In order to complete it, you will need glue and a paper clip . I think it won't be a problem for most of you, but just in…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Lifeweaver X Fox Phantom Thieves from Over watch. The supports required.…
mishkin2's Climbing Cheese Thieves Mice in MMU version instead of print and glue. Category: 2D Art
Sea of thieves cart 35 pieces Resolution: 0.2 mm Use glue to join the pieces together.
Sea of Thieves boat with oars included to be printed separately. Print settings below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Bote de Sea of Thieves con remos…
With this remix of mishkin2 “Cheese Thieves” you can print the mouse with the cheese without assembly or MMU. Start with yellow filament, than change to black at 1.6mm layer height. You will find the other mice in the linked original model.
This is an additional barrel lid for the "Barrel - Sea Of Thieves"-Model. For me the original lid was kinda hard to open so I created this extended version of the lid which is easier to twist. Print Settings Use the same settings as for…
Added the top part of the model to the bottom and set a platform on 1/3 of the high from the bottom. Thus separating the two compartments. If the platform is removed, the container can be opened from both sides.
Just a small remix from https://www.thingiverse.com/thing:3054474 Category: Other
I found that the layers didn't hold together as well as I would have liked, so I modified the original Inner Level to have a 10mm magnet space in the center rather than 6mm. This of course requires you to buy two different sized magnets…
I wanted a version of this board game, unfortunately, it is out of print, and finding a copy is extravagant partly due to its lack of copies in general and the initial cost/quality of the product, to begin with. So I whipped up this…
I love this model and thought of it when I created the battery holders. All models visible on the photo you can find in my collection. https://www.printables.com/@feri2303_813399/collections/1061160
An ancient coin I made from Sea of Thieves and a little extra painting aid/stencil I made so I could spray the colours on it
