1 / 4
HSW Jet Lighter Torch Holder for Honeycomb Storage Wall — zdjęcie 1
1 / 4

HSW Jet Lighter Torch Holder for Honeycomb Storage Wall

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds a single cheap eBay/Aliexpress jet torch in Honeycomb Storage Wall

Ocena
5 / 5
Polubienia
73
Pobrania
393
Wydruki
3
Wyświetlenia
864
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
  • use with blank insert_hollow from the original HSW board
  • the lighter has to be inserted from side as per picture

Check out my collection of HSW attachments here :)

Printing instructions:

  • no supports → print flat on surface
  • use 4 perimeters
  • layer height pictured is 0,2mm

Version history:

v1.0
14.08.2024

  • initial release

Tagi