1 / 6
Accesible exhaust fan cover for the XL enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the exhaust fan on the XL enclosure that allows an easier swap of the filter.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 117
- Wydruki
- 2
- Wyświetlenia
- 515
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 14)Remiksy (2)Kolekcje (89)Powiązane
The original steel sheet cover of the exhaust fan needs to be disassembled in order to swap the filter. This means to have access from the back but if your XL is butted against the wall, this process can be quite cumbersome. This design has an opening on the top where the filter is inserted and a lid clipped in place. Just reach the printer from the side, pop the lid off, swap the filter and place the lid again.
No extra hardware required.
Prints without supports.