Accesible exhaust fan cover for the XL enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.82 – €8.33 net (excluding VAT)
For file: XL_Enclosure_Fan_Cover_0.4n_0.2mm_PETG_XLIS_6h7m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.57 excluding VAT (range midpoint).
- Weight reported by the author
- 134 g
- Print time reported by the author
- 6.12 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of the exhaust fan on the XL enclosure that allows an easier swap of the filter.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 117
- Makes
- 2
- Views
- 517
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The original steel sheet cover of the exhaust fan needs to be disassembled in order to swap the filter. This means to have access from the back but if your XL is butted against the wall, this process can be quite cumbersome. This design has an opening on the top where the filter is inserted and a lid clipped in place. Just reach the printer from the side, pop the lid off, swap the filter and place the lid again.
No extra hardware required.
Prints without supports.