Signal Tower Base for Tabletop Wargames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit an HID headlight bulb (unpowered) and look like some kind of signal tower or power generator.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some old HID headlight bulbs and wanted to make them into terrain. Decided they sort of looked like a piece of a power generator or a signal tower of some sort. I designed a fairly simple base for them to slot into. The bulbs are specifically from a 2008 Subaru STI, but any bulb with the same socket should fit. You will need to cut off the little tabs. I intended for the plastic bit of the bulb to fit flush with the printed piece, but it doesn't. I ended up liking it better this way. If you do want it to fit flush, you can probably scale it up by 1-2%.
Printed with 15% infill and .2mm layer height, but it probably doesn't matter.