Signal Tower Base for Tabletop Wargames
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to fit an HID headlight bulb (unpowered) and look like some kind of signal tower or power generator.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some old HID headlight bulbs and wanted to make them into terrain. Decided they sort of looked like a piece of a power generator or a signal tower of some sort. I designed a fairly simple base for them to slot into. The bulbs are specifically from a 2008 Subaru STI, but any bulb with the same socket should fit. You will need to cut off the little tabs. I intended for the plastic bit of the bulb to fit flush with the printed piece, but it doesn't. I ended up liking it better this way. If you do want it to fit flush, you can probably scale it up by 1-2%.
Printed with 15% infill and .2mm layer height, but it probably doesn't matter.