1 / 1
E-cymbal Rotation Stopper (Anti spin) 8mm or 12mm rod - For Roland or Simmons Cymbals — zdjęcie 1

E-cymbal Rotation Stopper (Anti spin) 8mm or 12mm rod - For Roland or Simmons Cymbals

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The model name is so long it pretty much tells what it is :)

Ocena
0 / 5
Polubienia
0
Wydruki
0
Wyświetlenia
293
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Standard Digital File License

There are two different models that fit to two different diameter rods, 8mm or 12mm. 

Both models are compatible with Simmons and Roland e-cymbals.

You'll need to get some M6 nuts and thumb screws. Instead of thumb screw you can use drum screws too but my models are optimized for a specific model of thumb screw that works perfectly. Also the fact that you won't be using a drum key to tighten them means two things, firstly you can't over tighten them and crack your prints, secondly, thumb screw means you don't even need to reach for your drum key each time you want to make an adjustment, just use your hand :)

I'm leaving affiliate links for the nuts and the thumb screw I used.

Nuts:

I actually got an assortment of M6 nuts and hex screws, because I personally always end up needing them eventually. Click here.

But you can also only buy the nuts themselves. Click here.

Thumb screws:

I got a pack of 16, it was the cheapest per count and it's always good to have extras anyway. Click here.

 

I printed with ASA, 6 walls, 30% infill.

I believe PETG would also do really good.

 

I remixed the cymbal anti spin tool that came with Simmons drums.

 

 

Tagi