1 / 7
Sand scoop 130mm( about 5.1 inches)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shovel that sifts through sand to find objects.
- Ocena
- 5 / 5
- Polubienia
- 669
- Pobrania
- 1717
- Wydruki
- 7
- Wyświetlenia
- 7016
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 7) (Komentarze: 21)Remiksy (0)Kolekcje (758)Powiązane
- This is a model that has been remodeled from a previously manufactured sand scoop into a 130mm form.
- There is a slight difference between the modeling in the drawing and the printed photo, but after printing it was modified to slightly improve the strength of the handle.
- No support is needed.
- Since there are many small holes, please set the z retreat value a little higher to avoid movement interference.
- The output was petg.
Added
- There was a request to increase the hole size.
The existing hole width is 3mm. I added a model that is wider by 5mm.
- There was a request to extend the length of the handle. The original length is 100mm and the extended length is 120mm.
Amendments to
It wasn't a huge issue, but there was a slight mistake in modeling the tip of the shovel, which resulted in an uneven shape. I fixed it.
Reposted with a revised model.