1 / 7
Sand scoop 130mm( about 5.1 inches) — image 1
1 / 7

Sand scoop 130mm( about 5.1 inches)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A shovel that sifts through sand to find objects.

Rating
5 / 5
Likes
669
Downloads
1,717
Makes
7
Views
7,016
Reviews
7

Updated at source:

Model information

Category
Summer
License
Creative Commons — Attribution
  •  
  • This is a model that has been remodeled from a previously manufactured sand scoop into a 130mm form.
  • There is a slight difference between the modeling in the drawing and the printed photo, but after printing it was modified to slightly improve the strength of the handle.
  • No support is needed.
  • Since there are many small holes, please set the z retreat value a little higher to avoid movement interference.
  • The output was petg.

 

Added

  • There was a request to increase the hole size.
    The existing hole width is 3mm. I added a model that is wider by 5mm.

 

  • There was a request to extend the length of the handle. The original length is 100mm and the extended length is 120mm.

 

Amendments to

It wasn't a huge issue, but there was a slight mistake in modeling the tip of the shovel, which resulted in an uneven shape. I fixed it.

Reposted with a revised model.

 

Tags