1 / 5
VW Golf VII 7 Wireless Charger Reduction Tray for iPhone 12/13 mini (Einsatz für Ladeschale) — zdjęcie 1
1 / 5

VW Golf VII 7 Wireless Charger Reduction Tray for iPhone 12/13 mini (Einsatz für Ladeschale)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

iPhone 12/13 mini reduction tray for charging compartment in Golf 7 center console (fitting charging mat 5G1863328D)

Ocena
0 / 5
Polubienia
3
Pobrania
31
Wydruki
0
Wyświetlenia
880
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Model Details

  • reduction tray for wireless cell phone charging compartment in the center console
  • perfect fit for charging mat 5G1 863 328 D (e.g. Golf 7 starting from 2015)
  • suitable for smaller cell phones (e.g. iPhone 12 mini and iPhone 13 mini)
  • prevents charging interruptions due to shifting while driving
  • the device remains centered on the charging surface
  • size of the cutout approx. 135x70 mm (rounded corners) with opening for side buttons
  • suitable for iPhone 12/13 mini (with or without Apple Clearcase)

Printing Hints

  • prints upside down, no support required
  • recommended settings (PLA): layer height 0.16, infill 20%, skirt
  • optional settings: top/bottom concentric pattern, ironing

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Details zum Modell

  • Einsatz für drahtloses Handy-Ladefach in der Mittelkonsole
  • passgenau für Ladematte 5G1 863 328 D (u.A. Golf 7 ab 2015)
  • geeignet für kleinere Mobiltelefone (z.B. iPhone 12 mini und iPhone 13 mini)
  • verhindert Ladeunterbrechungen durch Verrutschen während der Fahrt
  • das Gerät bleibt zentriert auf der Ladefläche liegen
  • Größe der Aussparung ca. 135x70 mm (abgerundet) mit Öffnung für seitliche Tasten
  • passend für iPhone 12/13 mini (mit oder ohne Apple Clearcase Hülle)

Hinweise zum Drucken

  • kein Support notwendig (mit Oberseite nach unten)
  • empfohlene Einstellungen (PLA): layer height 0.16, infill 20%, skirt
  • optionale Einstellungen: top/bottom concentric pattern, ironing

Tagi