Bowtie router inlay template set - 2 sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bowtie router template set made for an 8 mm router bit and 14 mm guide bushing
- Ocena
- 0 / 5
- Polubienia
- 82
- Pobrania
- 421
- Wydruki
- 0
- Wyświetlenia
- 1979
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of 2 router templates for a bowtie inlay or bowtie joint :
- 1 template to route the negative part of the inlay (bowtie_template_ech1_negatif)
- 1 template to route the bowtie itself : you still have to cut 2 tabs of the bowtie and sand them flush (bowtie_template_ech1_positif)
Size of the bowtie :
- 120 mm length
- around 48 mm width
- 30 mm at the smallest width
- 4 mm radius in the corner
If you use both templates, make sure to use an 8 mm router bit with a 14 mm guide bushing or copy ring to have the matching radius.
You can find the one I used here : https://www.printables.com/fr/model/975141-festool-router-guide-bushing-adapter
The height of the templates is 6 mm, so it can be used with an 5 mm guide bushing.
I fixed the templates to the wood with double sided tape, but there are also 4 holes in the corners. If necessary, you can drill them to size and countersink them.
By tweaking the outer ring of the guide bushing with masking tape, I was able to ajust the tolerances and mill the joint in cherry wood.
Update 30.12.2024
I added two templates with approximately half the size of the first ones.
Have fun and leave a comment !