Arms stand for testing quartz watches or PCB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This device provides steady arms with pogo pins in order to set contact with the circuit
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a holder for various PCBs allowing to contact specific places on the board being held.
Might be useful for debugging Quartz Watches and other small devices.
Additional parts needed:
- Rubber O-rings: 4mm outer diameter / 1mm thickness. O-rings provide the ability to slide the arms up and down smoothly.
- Pogo pins: I use 9.5mm tall pins since they provided the biggest movement range for the tip. Installation hole diameter is 1.8mm (friction fitted)
- Brass contacts: I press fitted 2mm diameter brass pins, but can be adjusted for other options as well
- Connection wires
You would need to solder the wires to pins and contacts before use
Print notes:
- No support needed
- Don't forget to pause the printing ot install the O-rings. 2 pauses will be needed as each arm slot accepts 2 O-rings
Support the author:
The model is free to use and published under CC-BY license, however if you want to support the model author you can do it here: BuyMeACoffee link