DC motor vacuum pump (for vacuum bagging)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vacuum Pump V2 (DC motor pump)Electronic board to automate the vacuum pumpThis board has the following…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Vacuum Pump V2 (DC motor pump) Electronic board to automate the vacuum pump
This board has the following characteristics:
An ESP32 microcontroller will handle all the logic and communication with smartphone over Bluetooth Low Energy and WIFI over UDP two 5V relay boards can handle a 230V AC fridge motor coils (compatibilty with fridge compressor) an OLED display could be used for debugging a pressure sensor will convert vacuum level into a voltage read by the ADC of the MCU a DC motor can be controlled via N channels Mosfets a brushless DC motor can be controlled with an ESC controller (optionnal 5V control stage) The board is powered (optionnaly) with a cheap 12V to 5V DC/DC converter
A devoted Hackaday's project has been created. Please follow this project for more details : https://hackaday.io/project/197256-dc-motor-vacuum-pump
Category: Electronics