1 / 2
Bandsaw Insert for Craftsman's Bandsaw — zdjęcie 1
1 / 2

Bandsaw Insert for Craftsman's Bandsaw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Insert for Craftsman Bandsaw 12 Inch Band Saw - Sander

Ocena
0 / 5
Polubienia
6
Pobrania
39
Wydruki
0
Wyświetlenia
239
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Print your own bandsaw insert for your Craftsman (or other) bandsaw.

File Contents:

  • 'Bandsaw Insert.stl' - Original STL file
  • ‘Bandsaw Insert.FCStd’ - FreeCAD Document file (for making adjustments to the part to fit other models)
  • ‘Bandsaw Insert-Drawing.pdf’ - Drawing of the print with measurements

NOTE: Attribution is only required when selling or licensing this part or model or derivative works from this part or model.

Legal:

Mathotics provides 3D print designs ("the Designs") on an "as-is" basis without any warranties, express or implied. The use of the Designs is at the sole risk of the user. By downloading, accessing, or utilizing the Designs, the user agrees that the Mathotics shall not be held liable for any injuries, damages, or losses resulting from the use, fabrication, or modification of the Designs, including but not limited to personal injury, property damage, or any other harm, whether direct or indirect.

The user acknowledges that 3D printing and the use of 3D-printed objects involve inherent risks, including but not limited to mechanical failure, material defects, and improper use. The user agrees to assume full responsibility for ensuring that the Designs are appropriate for their intended use, including but not limited to ensuring that the materials and methods used to fabricate the Designs are safe and suitable for the intended purpose.

Mathotics makes no representations or warranties of any kind concerning the Designs, including, but not limited to, the fitness for a particular purpose, accuracy, completeness, or non-infringement of third-party rights. The user assumes all risks associated with the use of the Designs and agrees to indemnify and hold harmless Mathotics from any and all claims, damages, or liabilities arising from the use or misuse of the Designs.

The user agrees to comply with all applicable laws, regulations, and industry standards when using the Designs. Mathotics shall not be responsible for any legal consequences arising from the use of the Designs in violation of any law or regulation.

The user agrees to indemnify, defend, and hold harmless Mathotics, its affiliates, officers, employees, and agents from and against any and all claims, losses, liabilities, damages, costs, and expenses (including reasonable attorneys' fees) arising from or relating to the user's use of the Designs.

This clause shall be governed by and construed in accordance with the laws of United States of America. Any disputes arising from or relating to this disclaimer shall be subject to the exclusive jurisdiction of the courts of United States of America.

Tagi